| SIZES |
Rods -
Dia 7 mm to 50 mm Round Rods
|
| Tubes -
ID 10 mm to 70 mm / minimum wall thickness - 2 mm |
| Flats |
| - |
Upto 30 mm width - minimum wall thickness - 2 mm |
| - |
Upto 80 mm width - minimum wall thickness - 3 mm |
| - |
Upto 160 mm width - minimum wall thickness - 5 mm |
Profiles -
Angle / Channel / Corner Piece / Hat profile as per Drg
|
Colour : Natural
|
|
|
|
|
| PROPERTIES |
UNITS |
TEST
METHOD |
AVERAGE
TEST RESULTS |
|
|
|
|
Specific Gravity
|
--- |
IS: 10192-1982 |
2.05 + 0.1 |
| Water Absorption |
% |
IS: 1998-1962 |
0.2 (Max) |
| Tensile Strength |
Mpa |
ASTM D 638-01 |
600 (Min) |
| Flexural Strength |
Mpa |
ASTM
D790-81
OR IS: 1998-1962 |
700 (Min) |
| Flexural Modulus |
Gpa |
ASTM D790-81 |
35 (Min) |
Compression Strength (Axial)
|
Mpa |
ASTM D 695-80 |
350 (Min) |
Impact Strength
|
KJ/M² |
ASTM D 256-93a |
400 (Min) |
Electrical Strength, Min(Proof voltage at
90°Cin oil for 1
minute)
Radial (upto 8 mm thick)
Axial
|
KV/mm
KV/25 mm |
IS: 1998-1962
|
10 (Min)
50 (Min) |
Insulation Resistance
|
Ohms |
IS: 1998-1962 |
10¹º (Min) |
Dissipation Factor at 50 Hz
|
--- |
ASTM D150-98 |
0.02 (Max |
Relative Permittivity
|
--- |
ASTM D 150-98 |
5 (Max) |
Comparative Tracking Index
|
--- |
IEC 112-79 |
600 (Min) |
Marten Heat Distortion Temp.
|
°C |
DIN 53458/53462 |
155 (Min) |
|
|
Remarks
: Fire Retardent Pultruded section's can also be given.
|
